Hydroshark®
Hydroshark® 750
Our demand for rainwater treatment is growing every day!
The key to water treatment is the ability to separate suspended solids, or TSS (total suspended solids) as it is known in Europe and worldwide. This means all substances (particles) greater than 0.45 mya. The priority for water treatment is to be able to separate really small particles below 200 my in the first place, as they contain most of the pollutants such as heavy metals, hydrocarbons and PAHs. Microplastics, such as smaller fractions of tyre residues, etc., are also included in this category. Finally, tests show that most pollutants are usually between 63 my - 200 my, so our focus in developing Hydroshark has been on this area, i.e. to achieve optimum efficiency.
The most efficient particle cleaning on the market, reducing particulate matter by up to 63 my!
Depending on its size, it can handle a flow rate of up to 180 litres per second, which is quite unique.
Description
A compact high-flow particle separator that can also separate large quantities of oil.
The entire liner is installed in a well of the correct size, which then acts as a sludge trap.
Introducing Plug & Play solutions with different types of boreholes on the market.
1. The incoming water flow is directed tangentially towards the centre of the hydroseparator.
2. Particles travel downstream to the bottom, while liquid materials remain at the surface.
3. Particles are effectively separated and retained at the bottom of the sludge trap by means of a mesh at the bottom of the hydroseparator, waveguides at the bottom, and an inlet/outlet ratio that is specifically set and tailored through a toothed design. No pressure remains, so even the smallest particles can be separated optimally.
4. The quiet and calm flow of water now rises upwards and finds its way to the outlet.
5. The purified water passes through the teeth located 360 degrees around the peripheral canal.
6. Finally, the water is discharged through the outlet. (There is therefore no "direct" connection between the inlet (1) and the outlet (6).
Specification
Operation and maintenance
See
Function
A particle separator that removes solids from rainwater!
Separates hazardous substances that are transported in the stormwater stream.
These are mainly heavy metals such as copper, zinc, cadmium, lead, chromium, particulate hydrocarbons, polycyclic aromatic hydrocarbons (PAHs) and organic compounds - up to 63 mya.
* Used as an advanced pre-filter for all types of rainwater.
* With a bypass type oil separator to separate rainwater.
* More advanced Class II oil separator option.
EN 
LT 
LV 
ET 
RU