Grass reinforcements

"Plupave HD is designed for larger areas of grass to be reinforced and used by many types of vehicles and withstands all normal traffic loads such as braking and steering deflection when parking and turning, etc. The material, LDPE, is also a higher temperature material that is tailored to and provides greater flexibility at lower temperatures combined with driving comfort.

"Plupave HD is usually available in 58×58 cm, but the strongest 40×40 cm version is also available. Below you will find the available tiles and their dimensions. The surprisingly short installation time is due to the size (4×4 tiles = 1.35 m2) and the simple and intelligent design. As an added bonus, there are also white and/or yellow "markers" that can be pushed down over the tiles to mark desired boundaries or parking spaces etc. Finally, it is worth mentioning that surfaces such as 'grass or gravel reinforced'. Absorb rainwater naturally and effectively. Of course, this also provides some protection against flooding, especially when combined solutions are installed with our rainwater tanks.

The innovative click/lock system makes installation very fast. With proper preparation of the carrier layer and sub-surfaces, the installation time is calculated at 100 m²/hour. The panels are arranged and stacked and clamped together, and you hear a "click" as a confirmation that they are in the desired (correct) locking position. The plates can be compressed by their own weight, or a rubber mallet can help. Once the technique has been learnt, a tip to further speed up installation may be to pre-assemble several tiles which are placed in position at the same time. If the dimensions need to be adjusted during installation, this can be done using a smaller saw, pruning shears or similar.